technical data sheet adaptor rpc-7 ? bnc jack 07P151-K00S3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/12.04/3.0 all dimensions are in mm; tole rances according to iso 2768 m-h interface rpc-7 according to iec 457-2 bnc according to iec 60169-8, mi l-prf-39012, vg 95200, cecc 22120 documents n/a material and plating connector parts material plating center contact beryllium copper gold, min. 1.27 m, over nickel outer contact rpc-7 beryllium copper gold, min. 1.27 m, over chemical nickel outer contact bnc stainless steel passivated coupling nut rpc-7 stainless steel passivated dielectric 1 ppe dielectric 2 ptfe
technical data sheet adaptor rpc-7 ? bnc jack 07P151-K00S3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/12.04/3.0 f(ghz) electrical data impedance 50 frequency dc to 4 ghz return loss 22 db, dc to 4 ghz insertion loss 0.1 x db insulation resistance 5 g center contact resistance rpc-7 1.0 m outer contact resistance rpc-7 0.1 m center contact resistance bnc 1.5 m outer contact resistance bnc 1.0 m test voltage 1500 v rms working voltage 400 v rms mechanical data mating cycles rpc-7 5000 mating cycles bnc 500 center contact captivation 28 n coupling test torque rpc-7 1.95 nm recommended torque rpc-7 1.36 nm environmental data temperature range -40c to +85c thermal shock mil-std-202, method 107, condition b corrosion mil-std-202, method 101, condition b vibration mil-std-202, method 204, condition d shock mil-std-202, method 213, condition i moisture resistance mil-std-202, method 106 2002/95/ec (rohs) compliant tooling n/a suitable cables n/a packing standard 1 pce in box weight 46.1 g/pce draft date approved date rev. engineering change number name date herbert babinger 06/08/04 krautenbacher j. 19/10/06 b00 06-0478 b. dandl 19/10/06 while the information has been carefully compiled to the best of our knowled g e, nothin g is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infrin g e existin g patents. in the effort to improve our products, we reserve the right to make changes judged to be necessary.
|
